Beschrijving
APW3++, For one S9 or one L3+ or one D3
1. The power cord is not included, please find one with at least 10A from your local market.
2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
3. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.
4. The shipping for this batch will start soon after 1st December 2017, depending on when the units are ready to ship out and your position in the order queue.
5. All items added to cart are shipped according to the item with the latest shipping date in the cart. If you would like to receive an item earlier, please place a separate order for it.
6. Be sure to keep the original packing on hand when you get PSU, the original box should be used to return the PSU when you requesting RMA. Otherwise, it won’t be honored.
Specifications
|
Output |
DC Voltage |
12.15V |
|
Rated Current |
133A |
|
|
Rated Current |
100A |
|
|
Rated Power |
1600W |
|
|
Rated Power |
1200W |
|
|
Ripple & Noise |
<1% |
|
|
Voltage Regulation |
<2% |
|
|
Source Regulation |
<1% |
|
|
Load Regulation |
<1% |
|
|
Setup, Rise Time |
<2S |
|
|
Power off Protection Trip Time |
>9mS |
|
| Interface Type | 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors) | |
|
Noise Level |
<43DB |
|
|
Input |
Voltage Range |
100-240V AC |
|
Starting Voltage |
95-105V AC |
|
|
Frequency Range |
47-63Hz |
|
|
Power Factor |
>0.95 (full load) |
|
|
Leakage Current |
<1.5mA (220V 50Hz) |
|
|
Protection |
Low-voltage Input |
80-89V AC |
|
Output Short Circuit |
Yes |
|
|
Output Overcurrent |
134-185A max. |
|
|
Overheat Protection |
Yes |
|
|
Environment Conditions |
Operating Temperature |
-20°C – 50°C |
|
Operating Humidity |
20% – 90% relative humidity (non-condensing) |
|
|
Structure |
Dimensions |
220mm*108mm*62mm |
|
Cooling |
Fan |
Forced-air cooling |
Efficiency Test Curve Load versus temperature derating curve
Warranty
1. A twelve months’ warranty is provided starting from the ship-out date. To avail this warranty a Repair ticket must be generated by the customer on Bitmain’s website. Overclocking the miner will void the warranty immediately.
2. All sales are final. No refunds will be granted. Defective PSU can be repaired for free if they fall under the Bitmain warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.
3. The following events will void the warranty:
a. Customer removes/replaces any components by himself without receiving permission from Bitmain first;
b. Damage caused by poor power cable, lightning or voltage surges;
4. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense after opening a support ticket and troubleshooting with Bitmain’s instructions.
5. Bitmain will cover shipping cost when shipping a replacement unit within the warranty period.
6. If you notice there are some loose parts when you receive the PSU, please inform us by submitting a ticket within 3 days from the date the package is received according to UPS/DHL/FEDEX’s website.
Beoordelingen
Er zijn nog geen beoordelingen.